Automotive Charge Air Cooler Market is Projected To Reach USD 4.22 billion By 2030, From USD 2.94 billion in 2022,Registering a CAGR Of 6.20% During The Forecast Period 2023
According to a market research study published by Contrive Datum Insights, Before the compressed air enters the consumption manifold or combustion chamber, automotive charge air conditioners are typically utilized to cool it. The air compressed by the charger has a relatively high temperature, which in turn diminishes the air's density, thereby reducing the amount of oxygen available for combustion.
Farmington, May 16, 2023 (GLOBE NEWSWIRE) -- The Global Automotive Charge Air Cooler Market size was valued at USD 2.94 billion in 2022 and is projected to reach USD 4.22 billion by 2030, growing at a CAGR of 6.20% from 2023 to 2030. The primary use of a charge air cooler is to lower the air temperature, thereby increasing the air density, consequently reducing emissions and increasing the engine efficiency of the vehicle.
Growing demand for fuel-efficient vehicles amid increasing concerns about emissions to minimize carbon emissions is expected to further fuel the market growth. Increasing production of passenger vehicles in developing countries such as China, Mexico, Indonesia, India and Brazil. Growing consumption power and increasing availability of auto loans are expected to drive the market growth.
Request Sample Copy of Report " Automotive Charge Air Cooler Market Size, Share & Trends Estimation Reports By Type Outlook (Air-Cooled, Liquid-Cooled), By Application Outlook (Passenger Vehicles, Light Commercial Vehicles, Heavy Commercial Vehicles, Others), By Position Outlook (Integrated, Standalone), By Design Outlook (Tube & Fin, Bar & Plate), By Region and Forecasts, 2022-2030.", published by Contrive Datum Insights.
Segmentation Overview:
Deployment Outlook:
Liquid-cooled segment is expected to register the highest revenue growth rate in the global automotive charge air cooler market during the forecast period
On the basis of product type, the global automotive charge air cooler market is segmented into liquid-cooled and air-cooled. Liquid-cooled segment is expected to register highest revenue growth rate over the forecast period. Liquid-cooled charge air coolers are ideal for both gasoline and diesel engines, allowing engines to generate higher power and torque at lower vehicle speeds and across the operating range while using 25% less package space and providing 10% better heat rejection than comparable coolers.Liquid-cooled automotive charge air coolers are used to decrease the temperature of the air entering the engine's cylinders.
Organization Size Outlook:
Passenger vehicle segment accounted for a larger revenue share in the global automotive charge air cooler market in 2022
On the basis of vehicle type, the global automotive charge air cooler market is segmented into light commercial vehicles, heavy commercial vehicles, passenger vehicles, and others. The passenger vehicle segment accounted for a larger revenue share in 2022 owing to rising demand for passenger vehicles globally. Moreover, the affordability of such vehicles, rising disposable income, and increasing safety standards are raising demand for passenger vehicles. Rising number of various ride-sharing cab companies is another factor in increasing sales of passenger vehicles.
Regional Analysis:
Geographically, the global charge air chiller market for automobiles is divided into North America, Europe, Asia Pacific, and the Rest of the World. In 2021, North America held the largest market share and is expected to continue to dominate the market at the highest CAGR over the forecast period. Increasing demand for fuel-efficient and emission-free vehicles in these regions is one of the key factors propelling market expansion. In addition, the increasing rate of implementation of advanced technology in the region is anticipated to boost the market.
Buy this Premiu m Research Report@ https://www.contrivedatuminsights.com/buy/8742
Scope of Report:
Report Attributes
Details
Growth Rate
CAGR of 6.2 % from 2023 to 2030.
Revenue Forecast by 2030
US$ 4.22 billion
By Type
Air-Cooled
Liquid-Cooled
By Application
Passenger Vehicles
Light Commercial Vehicles
Heavy Commercial Vehicles
Others
By Design
Tube & Fin
Bar & Plate
By Industries
Government
Healthcare
Retail
Manufacturing
Others
By Fuel Type
Gasoline
Diesel
By Companies
Calsonic Kansei Corporation
Dana Incorporated
Hanon Systems
MAHLE GmbH
Denso Corporation
T.RAD Co.
Valeo
Others
Regions and Countries Covered
North America: (US, Canada, Mexico, Rest of North America)
Europe(Germany, France, Italy, Spain, UK, Nordic Countries, Benelux Union, Rest of Europe)
Asia-Pacific (Japan, China, India, Australia, South Korea, Southeast Asia, Rest of Asia-Pacific)
The Middle East & Africa(Saudi Arabia, UAE, Egypt, South Africa, Rest of the Middle East & Africa)
Latin America(Brazil, Argentina, Rest of Latin America)
Rest Of the World
Base Year
2022
Historical Year
2017 to 2022
Forecast Year
2023 to 2030
Market Dynamics:
Driver: Growing penetration of turbocharger in passenger cars
Turbochargers help in reducing vehicular emissions. Using a turbocharger reduces the displacement volume of the cylinder, which reduces the volume of the fuel required for the same output, and thereby reducing the exhaust emissions of the vehicle. It also increases fuel efficiency. It is because of these reasons the push for the adoption of turbocharger technology has intensified mostly in passenger cars. Passenger cars with conventional fuel include diesel and gasoline engines. Diesel engines have emerged as the dominant fuel type for carmakers, as diesel engines emit low CO2.
Restraint: Rising demand for electric vehicles
With increasing concerns raised over the environmental impact of conventional vehicles, governments around the world are encouraging the adoption of vehicles using alternative sources of fuel. EVs are zero-emission vehicles and are gaining preference for clean public transport across countries. Several national governments offer financial incentives, such as tax exemptions and rebates, subsidies, reduced parking/toll fees, and free charging, to encourage the adoption of EVs. On the other hand, the decline in sales of diesel vehicles signifies a huge obstacle for the growth of the charge air cooler market.
Opportunity: Implementation of high-performance engines
The constant research for lower fuel consumption and reduced exhaust emissions has constantly resulted in engine development. Particularly, the trend of engine downsizing with high-performance has led to a continuously increasing specific component load. With the substitution of high-volume engines with small, turbocharged engines, the requirement for thermal management has also evolved.
Challenge: Condensation within a charge air cooler
Manufacturers of charge air coolers had been facing the challenge of reducing the accumulation of condensed water in intercoolers. This can disrupt the operation of the engine when the water has aspired in large quantities. Today, intercoolers’ efficiency is increasing, and the outlet temperature of the compressed gases is lower, which create a greater danger of reaching dew temperature. To overcome the cost factor and facilitate the manufacturing process, carmakers often choose to use the same intercooler body in different cars.
Key Segments Covered:
Top Market Players:
Calsonic Kansei Corporation
Dana Incorporated
Hanon Systems
MAHLE GmbH
Denso Corporation
T.RAD Co.
Valeo
Others
By Type
Air-Cooled
Liquid-Cooled
By Application
Passenger Vehicles
Light Commercial Vehicles
Heavy Commercial Vehicles
Others
By Fuel Type:
Gasoline
Diesel
By Design
Tube & Fin
Bar & Plate
By Industries
Government
Healthcare
Retail
Manufacturing
Others
BFSI
IT and telecom
Regions and Countries Covered
North America: (US, Canada, Mexico, Rest of North America)
Europe: (Germany, France, Italy, Spain, UK, Nordic Countries, Benelux Union, Rest of Europe)
Asia-Pacific: (Japan, China, India, Australia, South Korea, Southeast Asia, Rest of Asia-Pacific)
The Middle East & Africa: (Saudi Arabia, UAE, Egypt, South Africa, Rest of the Middle East & Africa)
Latin America: (Brazil, Argentina, Rest of Latin America)
Rest Of the World
Check out more related studies published by Contrive Datum Insights:
Scroll Chiller Market -Global scroll chiller market size is estimated to be USD 2.9624 billion in 2022. The market is projected to touch USD 3.808 billion by 2030, exhibiting a CAGR of 3.2% during the forecast period.
Fuel Additives Market -The Global Fuel Additives Market Size Was USD 8.14 Billion In 2021. The Market Is Projected To Grow From USD 8.62 Billion In 2022 To USD 12.87 Billion In 2030 at a CAGR Of 5.9% During The 2022-2029 Period.
Pallet Truck Market - The Global Pallet Truck Market Is Expected to Reach USD 38.5 Billion by 2022. With a CAGR of 7.5%, It Is Expected To Reach USD 79.8 Billion by 2032.
Customization of the Report: The report can be customized as per client needs or requirements.For any queries, you can contact us on [email protected] or +1 215-297-4078. Our sales executives will be happy to understand your needs and provide you with the most suitable reports.
About Us: Contrive Datum Insights (CDI) is a global delivery partner of market intelligence and consulting services to officials at various sectors such as investment, information technology, telecommunication, consumer technology, and manufacturing markets. CDI assists investment communities, business executives, and IT professionals to undertake statistics-based accurate decisions on technology purchases and advance strong growth tactics to sustain market competitiveness. Comprising of a team size of more than 100 analysts and cumulative market experience of more than 200 years, Contrive Datum Insights guarantees the delivery of industry knowledge combined with global and country-level expertise.
Social: Facebook / LinkedIn / Twitter
Contact Us: Anna B. | Head Of Sales Contrive Datum Insights Phone: +91 9834816757 | +1 215-297-4078 Email: [email protected]
Website: https://www.contrivedatuminsights.com Contrive Datum Insights Press Releases Latest Contrive Datum Insights Latest Reports
The Global Automotive Charge Air Cooler Market size was valued at USD 2.94 billion in 2022 and is projected to reach USD 4.22 billion by 2030, growing at a CAGR of 6.20% from 2023 to 2030. Request Sample Copy of Report " Automotive Charge Air Cooler Market Size, Share & Trends Estimation Reports By Type Outlook (Air-Cooled, Liquid-Cooled), By Application Outlook (Passenger Vehicles, Light Commercial Vehicles, Heavy Commercial Vehicles, Others), By Position Outlook (Integrated, Standalone), By Design Outlook (Tube & Fin, Bar & Plate), By Region and Forecasts, 2022-2030 ", published by Contrive Datum Insights. Segmentation Overview: Deployment Outlook: Organization Size Outlook: Regional Analysis: Buy this Premiu m Research Report@ https://www.contrivedatuminsights.com/buy/8742 Scope of Report: Report Attributes Details Growth Rate 6.2 % Revenue Forecast by 2030 US$ 4.22 billion By Type By Application By Design By Industries By Fuel Type By Companies Regions and Countries Covered Base Year Historical Year Forecast Year Market Dynamics: Key Segments Covered: Top Market Players: By Type By Application By Fuel Type: By Design By Industries Regions and Countries Covered North America: Europe: Asia-Pacific: The Middle East & Africa: Latin America: Rest Of the World Check out more related studies published by Contrive Datum Insights: Scroll Chiller Market - Fuel Additives Market - Pallet Truck Market Customization of the Report: [email protected] +1 215-297-4078 About Us: Contact Us: Anna B. | Head Of Sales Contrive Datum Insights Phone: + Email: